Do you ever find yourself struggling to put on goalie gear for hockey? It can be difficult and frustrating, especially if you’re not sure what order to put everything on and how it should fit.
Fortunately, we have put together this comprehensive step-by-step guide to help you put on your hockey goalie gear the right way.
In this guide, you will find a list of the gear you need, as well as detailed instructions on how to correctly put on your chest protector, blocker, catching glove, pants, leg pads, and helmet.
Read on to learn how to properly put on your goalie gear and get ready for your next game!
Table of Contents
Short Answer
1. Start by putting on your hockey pants and then the girdle over the pants.
2. Next, put on the shoulder pads, chest protector, and elbow pads.
3. Then, put on the goalie gloves and blocker.
4. Finally, put on the goalie skates and helmet.
List of Gear Needed
When it comes to dressing as a hockey goalie, there are certain pieces of gear that you will need.
The essentials include a chest protector, blocker, catching glove, pants, leg pads, and a helmet.
The chest protector is designed to protect the upper body, the blocker is a glove-like piece of equipment that helps deflect shots, the catching glove helps you catch and hold onto shots, the pants provide protection for your lower body, the leg pads protect your legs from impact, and the helmet helps protect your head.
Depending on the level of protection you need, there may be additional pieces of gear that are necessary, such as elbow pads, knee pads, and a neck guard.
It is also important to make sure that the gear is properly sized and adjusted to ensure a comfortable fit.
Step-by-Step Guide for Putting On Chest Protector
Putting on hockey goalie gear can be an intimidating process, but it doesn’t need to be.
It is important to ensure you have all the necessary gear before you begin.
This includes a chest protector, blocker, catching glove, pants, leg pads, and a helmet.
To get started, begin with the chest protector.
This is the foundational piece of equipment that will provide protection and comfort.
When putting on the chest protector, it is important to make sure it is properly fitted.
Start by adjusting the shoulder straps to ensure a snug fit.
Make sure the straps are not too tight as this can cause discomfort.
Once the shoulder straps are adjusted, move on to the lower straps.
Adjust the lower straps to provide a secure fit, but not too tight.
Once the straps are adjusted, it is important to make sure the chest protector is covering the entire chest and torso area.
This will provide the best protection.
After the chest protector is fitted, it should be secured with a belt.
This belt should be securely fastened to ensure the chest protector remains in place during play.
The belt should be made of a durable material and fit snugly around the waist.
It is also important to make sure the belt is not too tight as this can cause discomfort.
Once the chest protector is properly fitted and secured, it is time to move on to the next piece of equipment.
The next step is to put on the blocker.
This is the piece of equipment that will help you block shots and deflect the puck away from the net.
Following the same steps for the chest protector, make sure the blocker is properly fitted and adjusted.
Check the straps and make sure they are not too tight.
Finally, it is important to ensure the chest protector and blocker are properly secured.
This will help to provide the best protection and ensure the equipment stays in place during play.
Be sure to check the straps and adjustments after each use to ensure everything is properly secured and in place.
By following these steps, you can easily and quickly put on your hockey goalie gear and be ready to take the ice in no time.
Step-by-Step Guide for Putting On Blocker
Putting on a hockey goalie blocker is an important step in getting ready for a game.
It is essential to ensure that the blocker fits properly and is securely fastened.
To begin, put the blocker on your dominant hand.
This will help with balance when playing in the net.
Make sure the blocker is snug but not too tight.
The elastic straps should be adjusted until the blocker is comfortable and secure.
The fastening straps should be tightened to ensure that the blocker remains in place during play.
Additionally, the padding should be checked to make sure it is in the right place and not causing any discomfort.
Once the blocker is properly adjusted and secure, you are ready to take the ice!
Step-by-Step Guide for Putting On Catching Glove
Putting on your catching glove is the fourth step in putting on hockey goalie gear. To ensure that you get the best fit and protection, it is important to properly secure the glove on your hand. Here are some tips and steps to help you do this:
1. Start by putting one hand in the glove and making sure your fingers are properly aligned in the finger stalls.
2. Make sure the cuff of the glove fits snugly around your wrist. If it is too loose, you can use the elastic straps located along the back of the glove to adjust the fit.
3. Secure the velcro strap across the back of the glove to keep it in place. This strap should be tight enough to keep the glove secure but not too tight that it cuts off circulation.
4. Once the glove is secure, you can adjust the fit of the thumb by loosening or tightening the buckle located at the top of the thumb stall.
5. Lastly, make sure the glove is properly adjusted on your hand by shaking it and making sure it doesnt slip off.
Following these steps will help you get the best fit and protection from your catching glove.
Remember, if the glove is too loose, you wont be able to make the necessary saves on the ice.
So make sure you take the time to properly secure your catching glove before stepping onto the ice.
Step-by-Step Guide for Putting On Pants
Putting on hockey goalie gear can be intimidating, but it doesn’t have to be.
With specific steps and tips, you can make the process easier and more efficient.
Pants are an important part of the goalie gear and should be put on after the chest protector, blocker, and catching glove.
Start by laying the pants on the ground and position them so the straps and straps for the leg pads are facing up.
Put your feet inside the pants and pull them up to your waist.
Secure the waist belt and make sure it’s tight enough to stay in place.
Then, use the velcro straps at the bottom and wrap them around your thighs.
The straps should be tight enough so that you don’t feel any bunching up or loose fabric.
Lastly, adjust the straps at the top of the pants so they are a comfortable length.
This will ensure that the pants are snug and secure.
With all these steps, you’ll be ready to take the ice in no time.
Step-by-Step Guide for Putting On Leg Pads
Once you have your chest protector and blocker secured, its time to put on your leg pads. Leg pads are essential for a hockey goalie, as they provide protection from shots and impacts, as well as help you move quickly and efficiently on the ice. However, they can be tricky to put on properly. To get the job done right, follow these steps:
1. Start by putting the leg pads on the ground and then laying down in front of them. This will make it easier to get them in the correct position.
2. Put your feet in the leg pads and then pull the knee strap tight so that the pads are snug against your legs.
3. Wrap the calf straps around your calves and tighten them. This will help keep the leg pads in place and provide additional protection.
4. Secure the thigh straps. Make sure that they are tight enough to keep the leg pads in place, but not too tight that they are uncomfortable.
5. Finally, fasten the waist straps and adjust the fit. You want the leg pads to be snug against your body, but not too tight that they are uncomfortable.
Once youve put on your leg pads, youre one step closer to being ready to take the ice.
Now that your leg pads are on, you can move on to the final step putting on your helmet.
Step-by-Step Guide for Putting On Helmet
Putting on a hockey goalie helmet is the last step in your gear-putting-on process, but its arguably one of the most important pieces of equipment.
For this reason, its important to do it correctly.
Heres a step-by-step guide on how to put on your helmet.
First, make sure youve got the right size helmet.
It should fit snugly around your head, with the chin cup resting just below your chin and the ear flaps resting just above your ears.
If its too big or too small, it wont give you the level of protection you need.
Once youve got the right size helmet, its time to put it on.
Start by holding the helmet in your hands and look for the back of the helmet, which is usually labeled.
Put the back of the helmet on first and then slide it forward until it sits comfortably on your head.
Next, youll need to adjust the straps. There are usually four straps on the helmet: two on the sides, one on the top, and one on the chin. Adjust these straps to fit your head snugly and make sure theyre tight enough to stay in place.
Finally, youll need to adjust the chin cup.
Make sure the chin cup is positioned directly under your chin and that its not too tight or too loose.
If its too tight, it will be uncomfortable and can cause chafing, and if its too loose, it wont provide the level of protection you need.
Once youve adjusted the straps and chin cup, youre ready to take the ice.
Remember to check the fit of your helmet before each game to make sure its still secure and comfortable.
With the right steps and a little bit of practice, youll be ready to take the ice in no time.
Final Thoughts
Putting on hockey goalie gear doesn’t have to be intimidating.
With the right steps and tips, you can make the process easier and more efficient.
Armed with the knowledge from this guide, you are now ready to take the ice with confidence.
So, grab your gear, strap it on, and get out there and make some saves!